OUR LINE INDUCTOR SYSTEMS

Adding is not only adding.

The AWG Line Inductor Systems supply a hose line with F-500 Encapsulator Agent in the required mixing ratio between 0% and 6%. A vacuum is set up through the injection principle in the suction part. The F-500 Encapsulator Agent is aspirating via a suction hose DN 19 with D-coupling. Following Line Inductor Systems are available:

Line Inductor Z1R
The Line Inductor Z1R has a flow rate of 100l/min and is the most compact one in our program (no image).

Line Inductor Z2R
The Line Inductor Z2R ensures a flow rate of 200l/min.

Line Inductor Z4R
The Line Inductor Z4R ensures a flow rate of 400l/min and is the one in our program with an average flow rate.

Line Inductor Z8R with a flow rate of 800l/min
The ZR8R ensures a flow rate of 800l/min and is the one in our program with the maximum performance.


Good to know:

  • The pressure loss through the line inductor is 1/3 of the inlet pressure.
  • To achieve a good spray pattern when using Nozzles, a pump output capacity of 9 bar is required.